square cutters (14 mm and 20 mm; or use similar sizes)
small heart cutter (14 mm; or use similar size - it needs to fit in the smaller square)
round cutters (sizes I used: 9 mm, 14 mm and a 17 mm)
mini palette knife (or use the back of the knife)
wooden lollipop sticks x 4
brushes (for glue and dusting)
Flower paste* (You'll find the amounts in the 'AMOUNTS' tab)
50/50 FP/SP mix** (You'll find the amounts in the 'AMOUNTS' tab.)
CMC powder (carboxymethyl cellulose) -
Edible glue
Dust colours:
silver
black
red
Clear alcohol (1-2 drops)
* FP = flower paste = gum paste
**SP = sugarpaste = fondant; FP = flower paste = gum paste; to get a 50/50 FP/SP mix you need to mix equal amounts of FP and SP f.ex. 50 g of FP and 50 g of SP. You don't need to weigh them - just mix similar size pieces.
Instead of the FP/SP mix you can use plain flower paste (gum paste) or modelling paste or sugarpaste (fondant) with CMC.
If you decide to use sugarpaste, add quite a lot of CMC to it - the paste needs to be thick/firm. Add the CMC to the paste shortly before forming the parts. Don't let the paste sit for a long time, otherwise it will get thick dry and crumbly.
10.5 cm x 7.5 cm
50/50 FP/SP mix:
grey - 120 g
Flower paste
red - 2 g
black - 1 g
16.
Remove the excess of the dust off with a soft, dry, clean brush.
Roll small black balls and stick them in the eye indentations. Stick some black paste in the mouth and push it in with the dresden tool.
Paint the wire with silver paint (silver dust dissolved in a small amount of alcohol).
We use cookies and other technologies to improve your experience and to analyse the use of our website. By clicking the ‘I Accept’ button or continuing to use our website, you are consenting to our
Privacy Policy
I ACCEPT
This page is intended to be viewed online and may not be printed.